Set up, install, and configure
25
Setting up the printer to fax
Setting up the fax function using analog fax
Notes:
•
This feature is available only in some printer models.
•
Some connection methods are applicable only in some countries or regions.
•
If the fax function is enabled and not fully set up, then the indicator light may blink red.
•
If you do not have a TCP/IP environment, then use the control panel to set up fax.
Warning—Potential Damage:
To avoid loss of data or printer malfunction, do not touch cables or the printer in
the area shown while actively sending or receiving a fax.
Using the fax setup wizard in the printer
Notes:
•
The setup wizard is available only if no device-based fax, such as analog, or Fax over IP (FoIP), is configured.
•
Before using the wizard, make sure that the printer firmware is updated. For more information, see
1
From the home screen, touch
Fax
.
2
Touch
Set up now
.
3
Type the fax name, and then touch
Next
.
4
Enter the fax number and then touch
Done
.
Using the Settings menu in the printer
1
From the home screen, touch
Settings
>
Fax
>
Fax Setup
>
General Fax settings
.
2
Configure the settings.
