Ricoh LD015 Page 89 Operating Instructions Manual Download

Page: 89 / 112

Changing the Paper Size

When loading 8

14"

size paper

Pull the back fence off from
the tray.

Place it in the corner pocket on
the left.

DDDD

While pressing the release lever,
adjust the side fences.

EEEE

Push the metal plate down, and
then square the paper and load it
in the tray.

Important

❒

Do not stack paper over the lim-
it mark.

❒

Load paper so that the paper
touches the right side of the
tray, or misfeeds might occur.

FFFF

While pinching the release lever,
adjust the side and back fences to
the new paper size.

Important

❒

When loading small quantities
of copy paper, be careful not to
squeeze in the side fence too
much or paper will not feed in
properly.

GGGG

Push the paper tray in until it
stops.

StellaC2_AEzen_F_FM.book Page 79 Monday, December 22, 2003 2:15 PM

Summary of Contents for LD015
















































































































Search results

Summary of Contents for LD015

Reviews:

Related manuals for LD015

Brands by name

Popular brands

Ricoh LD015, Operating Instructions Manual

Search results

Summary of Contents for LD015

Reviews:

Related manuals for LD015

Brands by name

Popular brands