manualshive.com logo in svg

Ricoh IS450, Operating Instructions Manual, Page: 57 / 74

Share
Download
Ricoh IS450 Operating Instructions Manual Download Page 57

43

DIP Switches

DIP Switches

Only the settings of DIP switches 1 through 3 can be changed.  Do not change the settings of the
other switches.

Important

❒

If multiple scanners with the SCAM function enabled are connected on the same daisy
chain, the host will not be able to recognize the IDs. In this case, set DIP switch 1 to
“ON”(SCAM function disabled), and set the SCSI ID with the rotary switch.

❒

If the daisy chain is too long, or if a nonstandard SCSI cable is used, misoperation may
occur during synchronous transfer.  In this case, set DIP switch 2 to “ON” (SCSI
synchronous transfer disabled).

❒

If this scanner is connected in the middle of a daisy chain, set DIP switch 3 to “ON”
(internal SCSI terminator off).

Leave these set to “OFF;” do not

change.

OFF: Internal SCSI terminator on

ON:

Internal SCSI terminator off

OFF: SCSI synchronous transfer

enabled

ON:

SCSI synchronous transfer

disabled

OFF: SCAM function enabled

ON:

SCAM function disabled

Summary of Contents for IS450











































































Reviews:

No comments