45
GR-C1 Training
Slide 45
Workflow Improvement
Auto Job Promotion - 1
The machine can skip specific defective jobs and start printing the
subsequent jobs.
Before using this function, turn on 'Store and Skip Error Jobs' (in the
'System' menu of 'Printer Features'.
When the following errors occur, the job will be skipped and the next job
will be printed.
Specified paper size is not available.
Specified paper type is not available.
No paper on the specified paper tray
No staples (*This is not covered by pre-detection of errors.)
Hole punch receptacle is full (*This is not covered by pre-detection of
errors.)
Jobs that are skipped will be stored as 'Hold Print' jobs (max: 200 jobs).
Skipped print jobs can be reprinted from the operation panel or Web Image
Monitor after the cause of the error is resolved.
If the number of pages for pre-detection of errors is increased, a longer time will
be required until the first page of the job is printed.
Print jobs that use IPDS can't be skipped.
When a Fiery controller or optional Counter Interface Unit is installed, this
function is not available.
