1.
Document feeder
(Option)
Original inserted into the document feeder are in-
dividually and automatically fed onto and re-
moved from the exposure glass.
☛
See page 82.
2.
Master eject unit
open button
Press to remove misfed paper or a misfed mas-
ter.
3.
Master cut button
Press this button to cut the master leading edge
after installing a new master roll.
4.
Pressure release
lever
Use to install the master roll.
5.
Drum rotation
button
Press to rotate the drum unit.
6.
Drum unit lock
lever
Lift to unlock and pull out the drum unit.
7.
Drum unit
The master is wrapped around this unit.
8.
Ink holder
Set the ink cartridge in this holder.
9.
Main switch
Use to turn the power on or off.
10. Paper delivery table Completed prints are delivered here.
11. Small size paper
delivery end plate
Use to align the leading edge of prints that are
A4, 8
1/2
" x 11" or smaller.
12. Paper delivery end
plate
Use to align the leading edge of prints larger
than A4, 8
1/2
" x 11".
13. Paper delivery side
plate
Use to align the prints on the paper delivery table.
14. Wing guides
When printing on thin or small size paper, lift
these guides.
☛
See page 15.
15. Master eject
container cover
Open when removing the master eject box.
❐
Other options:
Color Drums (red, blue, green, brown, yellow, purple, navy,
maroon, orange and teal)
Tape Dispenser
Key Counter
Cabinet
gold-eeg-2
GUIDE TO COMPONENTS
4
