Ricoh Gestetner 3240, Operating Instructions Manual

Page: 28 / 73

LOADING PAPER
❐ Regarding paper sizes that can be set, see the following pages:
1st tray
☛
See page 38, 40, and 41.
optional tray unit
☛
See page 43.
large capacity tray
☛
See page 51.
❐
If you want to change the paper size, see the following pages:
1st tray
☛
See page 38, 40, and 41.
optional tray unit
☛
See page 43.
large capacity tray
☛
See page 51.
Non-recommended Paper
❐
Folded, curled, creased, or damaged paper
❐ Torn paper
❐ Perforated paper
❐ Paper with conductive or low electrical resistance coating such as carbon or
silver coating
❐
Thermal paper, art paper
❐ Thin paper that has low stiffness
Notes For Paper
❐
Load paper with the copy side
down in the 500-sheet trays, and with the copy
side up in the large capacity tray. If copies are curled, try turning the copy
paper over in the tray. If there is no improvement, change to copy paper with
less curl.
❐ Do not use paper that has been already copied/printed on.
❐ The following types of paper cannot be fed from the paper tray. Load them in
the bypass tray.
•
OHP transparencies
•
adhesive labels
•
translucent paper
•
post card
❐ Correct curls in paper before loading.
❐ Fan paper to get air between the sheets before loading.
nb-4
LOADING PAPER
28