SWITCHING BETWEEN THE COPIER, PRINTER
AND SCANNER FUNCTIONS
By default, the machine is in Share mode and set to Copier when you first
switch on.
To Use The Copier:
Press the Copy key
Depending on the machine configuration, it may not be possible to use this
function while another job is running.
To Use The Printer:
Press the Printer/Scanner key.
The display will change.
☛
refer the screen on page 9.
Depending on the machine configuration, it may not be possible to use this
function while another job is still running.
To Use The Scanner:
1.
Press the Printer/Scanner key.
The machine will switch to Printer.
☛
refer the figure on page 9.
2.
Touch the Scanner key.
The machine will switch to Scanner.
Depending on the machine configuration, it may not be possible to use this
function while another job is still running.
If the Scanner Only Mode is selected, scanner function can be used at the
begining.
nb-3
SWITCHING BETWEEN THE COPIER, PRINTER AND SCANNER FUNCTIONS
14
Summary of Contents for Gestetner 3240
