5
J
Slowly lower the inner cover out.
K
Tighten the two screws using the
provided screwdriver.
Note
❒
Be sure to return the provided
screwdriver to its original posi-
tion on the back of the front cov-
er.
L
Turn the green lever clockwise.
M
Slowly close the front cover by
pushing the two areas on the left
and right.
N
Plug in the power cable, and then
turn on the power.
The printer starts calibration. Wait
until it stops. The following mes-
sage appears on the display:
Important
❒
To avoid malfunction, do not
turn off the power during cali-
bration.
ZHXH530J
ZHXH440J
ZHXH420J
Calibrating...
ZDJH041J
filename_Chapter-1 Page 5 Tuesday, November 22, 2005 3:13 PM
