6/12
FV-L500B1
Product Specifications Rev. 1.02
2. Electronic / Mechanical / Environmental Specifications
Model Number
FV-L500B1
Imager
2/3” Interline 5.0 Mega Pixel monochrome progressive: ICX625AL
Total Picture Elements
2456 (H) x 2058 (V)
Active Picture Elements
2448 (H) x 2058 (V)
Cell Size
3.45 (H) x 3.45 (V) µm
Scanning System
Progressive
Scanning Method
Full Scanning, Partial Full Scanning,
½ Partial Scanning, ¼ Partial Scanning, Variable Partial Scanning,
Binning, Binning Partial Scanning,
Binning ½ Partial Scanning, Binning ¼ Partial Scanning,
Binning Variable Partial Scanning
Vertical Frequency
(Frame Rate)
16 Hz
Horizontal Frequency
33.264 kHz
Pixel Frequency
64 MHz
@ 8bit output
<= 4 Digit (Gain 0 dB)
@ 10bit output
<= 15 Digit (Gain 0 dB)
S/N Ratio
(Standard
Deviation)
@ 12bit output
<= 60 Digit (Gain 0 dB)
Minimum Scene Illumination
0.24 Lux at F1.2
Sync. System
Internal
Video Output Format
Digital 8, 10, or 12 bit Camera Link (Base Configuration)
Tap Configuration
2 Taps (2XE-1Y)
Exposure Time
OFF, 1/8 to 1/209,000 sec. (Variable at every H and clock)
Gain
0 to 18.309 dB
Gamma
1.0
Input Voltage
DC 12V± 10% via Camera Link connector
Power
Consumption
Less than 4.0 W
Operational Mode
Free-run, Edge Preset Trigger (V-reset, Non-reset);
Pulse Width Trigger (V-reset, Non-reset)
Electronic
Specifications
Communication
RS232 via Camera Link connector
Dimensions
35 (W) x 35 (H) x 30.2 (D) mm (NOT including lens mount and the connector)
35 (W) x 35 (H) x 40.7 (D) mm (NOT including the connector)
Optical Filter
No IR cut filter
Materials
Aluminum (AC)
Lens Mount
C mount
Interface Connector
I/O Connector: HR 10A-7R-6PB (Hirose) or equivalent
Camera Link Connector: SDR (3M) or equivalent
Mechanical
Specifications
Weight
Approximately 80g
Operational
Temperature: -5 to 40
⁰
C
Environmental
Specifications
Temperature
Storage
Temperature: -30 to 65
⁰
C
