Ricoh Fiery E-820, Configuration Manual

Page: 94 / 190

4
4-36 Performing Setup from the Control Panel
Web Services Setup
IPP Setup
Port 9100 Setup
Network Setup
Service Setup
Web Services Setup
Enable Web Services
Yes/No [Yes]
Select Yes to make the WebTools available to users (see page 6-1 ).
TCP/IP must be enabled on the E-820 and on user workstations. The WebTools
include WebSpooler, Status, WebLink, WebScan, WebDownloader, WebSetup, and
Installer.
A Java-enabled Web browser and a valid IP address or DNS host name are required
for each user. For details on browser and computer requirements, see the
Quick
Start Guide .
Network Setup
Service Setup
IPP Setup
Enable IPP
Yes/No [Yes]
Select Yes to enable printing with the Internet Printing Protocol (IPP). You must
enable Web Services. For information on setting up user computers to use IPP
printing, see the
User Software Installation Guide .
Network Setup
Service Setup
Port 9100 Setup
Enable Port 9100
Yes/No [Yes]
This option enables applications to open a TCP/IP socket to the E-820 at
Port 9100 to download a print job.
Port 9100 Queue
Direct/Print Queue/Hold Queue [Print Queue]
Specify the E-820 print connection for downloading jobs to Port 9100. Only the
print connections you have enabled in Printer Setup are available.