6
6-1
Configuring the E-820 and clients for WebTools
Fiery WebTools allow you to manage your E-820 remotely from the Internet or from
your company’s intranet. The E-820 has its own home page, from which you can select
a variety of functions, including Status, WebSetup, WebSpooler, WebLink, Installer,
WebScan, and WebDownloader.
For more information on using WebTools, see the
Configuring the E-820 and clients for WebTools
The WebTools provide access to many E-820 functions via the Internet (or intranet),
providing additional flexibility in remote management. You can access the WebTools
from a Windows or Mac OS computer.
T
O
SET
UP
W
EB
T
OOLS
ON
THE
E-820
1.
In E-820 Network Setup, enable TCP/IP.
2.
Set a valid, unique IP address for the E-820, and then set the subnet mask.
Set a gateway address, if required.
3.
Enable Web Services.
4.
In E-820 Printer Setup, confirm that the Print Queue
is published.
T
O
SET
UP
W
EB
T
OOLS
ON
A
COMPUTER
1.
Enable TCP/IP networking.
2.
Assign the workstation a valid, unique IP address and subnet mask, and a gateway
address, if required.
3.
Install an Internet browser that supports the Java language and frames.
Make sure Java is enabled. For more information on supported browsers and
WebTools requirements, see the
Chapter 6:
Configuring
Fiery WebTools
