background image

2

2-8

Setting up Network Servers

E-820 on a NetWare 4.x or 5.x network

The NetWise

 features built into the E-820 support the following network operating 

environments:

• NetWare 4.x or 5.x—NDS (Novell Directory Services)

• Servers running NetWare 4.x or 5.x in bindery emulation mode

For Ethernet-based networks, the IPX/SPX protocol is supported. For Token Ring-
based NetWare networks, both IPX/SPX and TCP/IP are supported.

Setting up a NetWare environment correctly requires the presence and active 
cooperation of the Novell network administrator. You must have administrator 
privileges on the network to create new NDS or bindery objects.

N

OTE

:

The term “bindery server” is used to refer to a Novell file server running 

NetWare 4.x or 5.x in emulation mode. The term “NDS” is used to describe 
components of a NetWare operating system running NetWare 4.x or 5.x in native 
mode.

NetWare clients print to the E-820 through the Novell network server. Server setup 
and client network setup are outlined in this chapter, client printing setup is described 
in the

 User Software Installation Guide

, and printing is described in the 

Printing Guide

.

The E-820 can receive print jobs from NetWare clients over Ethernet or Token Ring 
network topologies. (For information on the Token Ring option, see Appendix A.) 
During E-820 Setup, you select the frame type or types that will be used for 
communication between the E-820 and network servers. Frame type refers to the 
format of a communications packet; frame types are specified in a startup file when the 
NetWare server (or any other workstation) loads its network drivers.

Summary of Contents for Fiery E-820































































































































































































Reviews: