Ricoh FAX1800L, Operating Instructions Manual, Page: 27 / 64

Memory Transmission and Immediate Transmission
15
2
Immediate Transmission
Immediate Transmission is conve-
nient when:
• You wish to quickly check whether
you have successfully connected
with the other party's fax machine.
• Your machine's memory is getting
full.
The machine dials immediately after
you press the
{
Start
}
key (or at the
specified time, if you used a time-de-
lay feature like Send Later). The mes-
sage is scanned and transmitted page
by pag e with ou t being stored in
memory.
A
Make sure that the machine is in
standby mode.
The display should look like this:
READY 100% 10:00
SET DOC. OR DIAL NO.
Note
❒
The memory indicator should
go out. If the memory indicator
is lit, press the
{
Memory
}
key.
B
Place the entire document face
down into the feeder.
TRANSMIT OPTION i
DIAL FAX NUMBER
Note
❒
No more than 30 pages.
❒
You can dial before you set the
document. Place the document
after you dial the number and
go to step
D
.
C
Dial.
TRANSMIT Y/START
5551234
D
Press the
{{{{
Start
}}}}
key.
5551234
DIALING
The machine dials and connects to
the other party. The number that
you dialed and the other party's
OWN NAME or FAX NUMBER is
displayed.
Canceling an Immediate
Transmission
Before start is pressed
A
Press the
{{{{
Stop
}}}}
key, or remove
the document you have set.
While dialing or during transmission
A
Press the
{{{{
Stop
}}}}
key.
However, the fax message which
has already scanned in has trans-
mitted.
Remove the document after it is
canceled.
Smt2AE-basic_FM.book Page 15 Friday, September 22, 2000 6:28 PM