Ricoh BOOKLET MAKER BK5010 Operating Instructions Manual Download

Page: 53 / 62

The Feed belts need to be cleaned regularly when in use, and if the unit has not been used

for a period of time. How often this should be done, depends on the paper type and print

quality.

An increasing number of misfeeds is one indication of the need to clean the Feed belts. Clean

the feed belts with water and a lint free cloth.

Open the top cover.

Clean the upper feed belts (A). The upper feed belts can easily be rotated in either

direction.

Lift up the upper feed belts to access the lower feed belts.

Clean the lower feed belts (B). Rotate the lower feed belts towards the outfeed side for

complete cleaning.

Place the upper feed belts in normal position.

Close the top cover.

Book Folder

Upper feed belts lifted up.

Upper feed belts in normal position.

Cleaning feed belts

Summary of Contents for BOOKLET MAKER BK5010































































Search results

Summary of Contents for BOOKLET MAKER BK5010

Reviews:

Related manuals for BOOKLET MAKER BK5010

Brands by name

Popular brands

Ricoh BOOKLET MAKER BK5010, Operating Instructions Manual

Search results

Summary of Contents for BOOKLET MAKER BK5010

Reviews:

Related manuals for BOOKLET MAKER BK5010

Brands by name

Popular brands