Ricoh BOOKLET MAKER BK5010, Operating Instructions Manual

Page: 27 / 62

2
27
Changing settings
Selecting Cover Feeder Mode, continues
The Purge mode is used when you want to completely
empty the Cover Feeder from covers.
Remove all cover sheets from the bin.
Select Purge and press the [Run] button. The prefed
cover sheet will now be fed into the Booklet Maker
to the stapling area, but without being stapled.
Open the Top Cover and remove the cover sheet.
note
If you open and close the Top Cover without removing
the cover sheet, the cover sheet will be stapled and
folded and then fed to the stacker.
Make sure that the cover sheets are well fanned to
avoid misfeeds or double-feeds.
Align the cover sheets well to achieve a reliable
feeding operation and good finishing results.
When using printed covers make sure that the ink
has completely dried, to avoid smearing.
Press on top of either air nozzle (A) to lower the
paper bin. Load the covers facing downwards into
the paper bin.
Move the adjustable side guides (B) up against the
cover sheets until there is no clearance.
Loading covers
B
A