Ricoh Aficio SP C730DN, User Manual

Page: 65 / 100

Classification Code Error
The classification code is not specified with the printer driver.
For details about how to specify classification code settings, see "Specifying the classification code for a
print job", Operating Instructions.
Collate cancelled.
Collate was canceled. Turn off the main power switch and then back on again.
If the message appears again, contact your service representative.
Collate: Page max.
The amount of free memory is insufficient to perform collating. Reduce the number of pages to be printed
or install the optional SDRAM.
Command Error.
An RPCS command error occurred. Check that the communication between the digital camera and the
printer is working correctly.
Compressed Data Error
The printer detected corrupt compressed data.
Check that the program you used to compress the data is functioning correctly.
Duplex cancelled.
Duplex printing was canceled.
Change the setting for "Duplex Tray" in [Paper Input] to enable duplex printing for the paper tray. For
details about setting "Duplex Tray", see "Paper Input", Operating Instructions.
Error has occurred.
A syntax error, etc., occurred. Check that the PDF file is valid.
Error occured. Prntd/Cncld.
An error occurred during printing, but it was skipped.
Excd Prt Vol Use max count.
• Printing was canceled because the maximum number of pages allowed to be printed was reached.
Contact your user administrator.
• Maximum number of User Codes allowed to be registered has been reached. Delete unnecessary
User Codes.
File System Error.
PDF direct printing could not be performed because the file system could not be obtained.
Turn off the main power switch and then back on again. If the message appears again, contact your
service representative.
When Messages Are Displayed
63