22
Ricoh Co. Ltd.
http://www.ricoh.com/
Service Maintenance Mode – 1
After entering Service Mode, press the SW supporter once to select
service mode set 1 (table below).
Confirm that the Toner, Drum, and Error LEDs light.
Press the SW supporter from 1 to 7 times to select a maintenance
function or mode as shown by the following table.
Back to normal state
Eight times or more
15) Paper Size Setting (A4/Letter)
Seven times
14) QA Test Print
Six times
13) RAM Check
Five times
12) NV-RAM Value Dump Mode
Four times
11) Fixing Unit Test Print
Three times
10) Continuous Grid Pattern Print Mode
Twice
9) Factory Inspection Mode
Once
Resulting Function/Mode
Press SW Supporter
Service Mode Set 1
Refer to the FSM for details about the individual functions or modes.
No additional notes.
