Ricoh Aficio AP3800C, Setup Manual

Page: 53 / 84

Installing Options
45
2
Installing the Duplex Reversal Unit
AAAA
Holding the Duplex Reversal
Unit in a level position with both
hands, insert the hooks into the
groove of the stand. At this point,
adjust the tip of the hooks to the
line on the stand (
A
A A
A
) and insert
slowly (
B B B B
). Do not let go of the
Duplex Reversal Unit even after
insertion.
The hooks of the Duplex Reversal
Unit grasp the bar inside the
groove of the stand.
BBBB
Supporting the Duplex Reversal
Unit, remove the stopper of the
mounting bracket on the printer.
This stopper will be used in a later
step
E
, so be careful not to lose it.
CCCC
Supporting the Duplex Reversal
Unit, remove the adhesive tape
and hold the auxiliary bar in front
of the hook on the left side, and
then stand it up.
DDDD
Hook the hole of the auxiliary bar
on the mounting bracket of the
printer.
In step
E
, move the auxiliary bar to
the position shown with a perfo-
rated line in the illustration.
ZDJP045J
ZDJP046J
ZDJP047J
ZDJP048J