Installing the Fuser Oil Unit
15
2
Installing the Fuser Oil Unit
Install the Fuser Oil Unit to the Fusing
Unit.
AAAA
Pull out the left cover slowly.
BBBB
Open the upper left cover.
CCCC
Holding the green handle, pull
up the Fusing Unit slowly in the
direction as shown in the illustra-
tion.
Important
❒
Do not touch any areas other
than the handle.
When replacing the fusing unit, do
not turn the blue dial at the side of
the new fusing unit until the pow-
er switch is turned on.
DDDD
Put the removed Fusing Unit in a
stable and level place.
EEEE
Take out the Fuser Oil Unit from
the bag, and remove seal (
A
A
A
A
), and
then seal (
B
B
B
B
) as shown in the il-
lustration.
Note
❒
Be sure to remove seal (
A
), and
then pull it out in a level man-
ner.
Important
❒
Be sure to remove the seals to
avoid printer malfunction.
❒
Be sure to remove seal (
A
) first,
and then remove seal (
B
) to
avoid an oil leak.
❒
There is oil on the removed
seals. Be careful not to let them
c om e in co n tac t w ith y ou r
clothes.
❒
Be sure to put the Fusing Oil in
a stable and level place.
ZDJH047J
ZDJH048J
ZDJH049J
ZDJH053J
Summary of Contents for Aficio AP3800C
Page 82: ...74 AE AE G060 MEMO...
