Ricoh Aficio AP3200, Operating Instructions Manual, Page: 71 / 140

Printer Does Not Print
59
4
If you print using the Post-
Script driver, printing
does not start or is inter-
rupted. The data is cleared when the Job Timeout period is exceeded.
❖ ❖ ❖ ❖
Windows 95/98/Me
Set a longer [ Job Timeout ] period with the [ PostScript ] tab of the
Printer Properties.
❖ ❖ ❖ ❖
Windows 2000
Set a longer [ Job Timeout: ] period with the [ Device Settings ] tab
of the Printer Properties.
❖ ❖ ❖ ❖
Windows NT 4.0
Set a longer [ Job Timeout ] period with the [ Device Settings ] tab of
the Printer Properties.
❖
❖ ❖
❖
Macintosh
Set a longer [ Job Timeout ] period.
A PostScript error might occur if there is not enough memory in
the printer, or there are errors in the print data sent to the printer.
• Print a configuration page to configure the memory size and
confirm the memory size is max or not.
• If the memory size is not the maximum, increasing the memory
may solve this problem. Install Memory Unit TypeB. Other-
wise you should contact your sales or service representative.
For more information about the memory, see P.113
“Functions
That Require Options” .
The print job might be reset. Do the following.
• Confirm that you have selected the correct printer driver. Try
printing again.
• Set a longer Wait Timeout.
❖ ❖ ❖ ❖
Windows 95/98/Me
Set a longer [ Wait Timeout ] period with the [ PostScript ] tab of
the Printer Properties.
❖ ❖ ❖ ❖
Windows 2000
Set a longer [ Wait Timeout: ] period with the [ Device Settings ]
tab of the Printer Properties.
❖ ❖ ❖ ❖
Windows NT 4.0
Set a longer [ Wait Timeout ] period with the [ Device Settings ]
tab of the Printer Properties.
❖ ❖ ❖ ❖
Macintosh
You can specify a longer “I/O Timeout” period on the op-
eration panel.
⇒
P.93 “Using the Operation Panel”
Possible Cause Solutions