10.2 DEVELOPMENT DRIVE MOTOR AND TONER SUPPLY
CLUTCH REPLACEMENT
1. Turn off the main switch.
2. Remove the rear cover. (See Outer Cover Removal.)
3. Remove the controller board bracket (See Controller Board Bracket
Replacement)
4. Remove the SCSI HDD Unit (See HDD unit Replacement)
5. Swing out the SCU board plate [A] (4 screws).
6. Remove the fly wheels [B] (3 screws).
7. Remove the drive gear holder [C] (2 screws).
8. Remove 2 bushings [D], 1 gear [E], and 1 shaft [F].
NOTE : The bushings drop easily.
[A]
[B]
A195R538.wmf
[D]
[E]
[D]
[C]
[G]
A195R551.wmf
A195
Copier
25 April 1997
INNER AND OUTER COVERS
43
