Mode No.
Function
Settings
Class 1 Class 2
4911
5
HDD Setting
(Total Storage
Capacity)
Input the total storage capacity of the hard
disk at replacement.
In future, hard disks of various sizes may
be available. In this case, use this SP
mode when installing a new disk.
6
HDD Setting
(Bad Sector
Information
Reset)
Resets the bad sector information which
is stored in the E
2
PROM on the EX-IPU
board.
This SP should be performed when the
hard disk is replaced.
7
HDD Setting
(Bad Sector
Display)
Displays the number of bad sectors there
are on the hard disk.
5019
LCT Paper
Size Setting
Selects the paper size for the LCT.
A4 (230V
machines)
8
1/2
" X 11"
(115V
machines)
When changing the setting, the position of
the side fences for the LCT should be
changed.
5104 *
A3/11"x17"
Double Count
Specifies whether the counter is doubled
for A3/11"x17" paper.
No
Yes
If "YES" is selected, the total counter and
the current user code counter counts up
twice when A3/11"x17" paper is used.
5106 *
ADS Level
Selection
Selects the image density level that is
used in ADS mode.
1 ~ 7
1 notch /step
4
5118 *
Disable
Copying
Selects whether the copy function is
disabled or not.
No
Yes
5220 *
Auto Stamp
Function
Selects whether the auto stamp function
is enabled or not.
On (115V
machine)
Off (230V
machine)
5305
Auto Off Mode This SP mode is used only for 115V
machines (Energy Star
standardization).
Selects whether the auto off timer setting
is enabled or disabled
Enabled
Disabled
When "disabled" is selected, the auto off
timer range will be wider than the default
timer range. (In UP mode, the user will be
able to select a time between 0 and 120
minutes.) If "0" is selected, the auto off
timer function is disabled.
5501 *
1
PM Alarm
Selects whether the PM alarm is enabled
or not.
Enabled
Disabled
5501
2
PM Alarm
Interval
Sets the PM interval, with an alarm.
0 ~ 255
1k copies/step
120 k copies
When the setting is "0", this function is
disabled.
SERVICE PROGRAM MODE TABLES
25 April 1997
28
