Specifying a Destination
69
1
C
Press the Destination key programmed with the desired destination.
If the desired Destination key is not shown, press
[
U
]
and
[
T
]
to look through
the list.
To cancel the selection, press the selected Destination key again. You can also
press the
{
Clear / Stop
}
key to cancel the selection.
To select more destinations, repeat steps
and
The destination is set and the Destination key is highlighted.
D
Press the
{
Start
}
key.
Note
❒
To check the contents of Destination keys, print the destination list.
Reference
“System Settings”, General Settings Guide
“Registering Addresses and Users for Facsimile/Scanner Functions”, Gen-
eral Settings Guide
Switching the titles in the Address Book
There are three types of titles for destination lists; “Title 1”, “Title 2”, and “Title 3”.
The above display shows “Title 1”.
A
Press
, the magnifier icon.
B
Press
[
Switch Title
]
.
C
Select the type of the title, and then press
[
Exit
]
.
