manualshive.com logo in svg

Ricoh Aficio 2016, Operating Instructions Manual, Page: 59 / 72

Share
Download
Ricoh Aficio 2016 Operating Instructions Manual Download Page 59

51

5. Remarks

Do's and Don'ts

R

 

CAUTION:

Important

❒

Do not turn the power off while
the On indicator is lit or blinking.
Doing so may damage the memo-
ry.

❒

Before unplugging the power cord
or turning off the main power
switc h, m ake sure remaining
m e m ory   space  is  at   100% , a s
shown on the display. See p.12
“Turning Off the Power” and
“Turning Off the Main Power”.

• When you use this machine for a

long time in a confined space with-
out good ventilation, you may de-
tect an odd smell. To keep the
workplace comfortable, we recom-
mend that you keep it well venti-
lated.

• Do not touch areas on or around

the fusing unit. These areas get hot.

• After making copies continuously,

the exposure glass may become
warm—this is not a malfunction.

• The area around the ventilation

hole might feel warm. This is
caused by exhaust air and is not a
malfunction.

• When the machine is not in use

and in stand-by mode, you may
hear a small noise inside. This is
caused by the image stabilization
process and is not a malfunction.

• Do not turn off the operation

switch while copying or printing.
Make sure all copying or printing
has finished first.

• The machine might not produce

good copy images if condensation
forms inside as a result of rapid
temperature change.

• Do not open the covers of the ma-

chine while copying or printing. If
you do, misfeeds might occur.

• Do not move the machine during

copying or printing.

• If you operate the machine im-

properly or a machine failure oc-
curs, settings might be lost. Be sure
to make a note of your machine
settings.

• The manufacturer shall not be lia-

ble for any loss or damage result-
ing from mechanical failure, loss of
settings, or use of the machine.

•

Unplug the power cord from the 
wall outlet before you move the 
machine. While moving the ma-
chine, you should take care that 
the power cord will not be dam-
aged under the machine.

KirC2_AEcopyF1_FM.book  Page 51  Wednesday, April 27, 2005  7:26 PM

Summary of Contents for Aficio 2016









































































Reviews:

No comments