29
SETTING A LEADING/TRAILING EDGE MARGIN
You can set a margin on the leading or trailing edge of the copy when you use Roll Feeder (option)
in the Synchro Cut mode. When using the Bypass Table, and Preset/Variable Cut Mode you can only
set the trailing edge margin.
Notes
❐
You can set a margin of ±99mm, ±4.0” in 1mm, 0.1” steps on either the leading or trailing edge.
❐
When you set a leading margin, the copy image is shifted to the trailing edge of the margin.
When you make a copy in the Bypass Table, Preset Cut, or Variable Cut mode, the copy image
might extend off the paper depending on the leading margin width.
1
Press the Function Select key until the “Lead-
ing Edge” or “Trailing Edge” indicator is lit.
Paper Length
Synchro
Preset/
Variable
Leading Edge
Trailing Edge
Copy Counter
Function Select
Bypass Select/
Roll Paper Cut
Cut Select
Preset Cut
Summary of Contents for A251
