Ricoh 3500SP Facsimile Reference Manual Download Page 152

Page: 152 / 312

Other Transmission Features

142

Setting an e-mail destination as a BCC

E-mail is sent to all specified destinations as bcc.

Place the original, and then select the scan settings you require.

Specify the sender.

For details about specifying senders, see “Sender Settings”.

Press

[

Sub TX Mode

]

Press

[

E-mail Options

]

Select

[

Yes

]

[

]

for BCC TX.

Press

[

]

twice.

The standby display appears.

Specify a destination, and then press the

{

Start

}

key.

Reference

p.113 “Sender Settings”
“Facsimile Features”, General Settings Guide

Summary of Contents for 3500SP

























































































































































































































































































































Search results

Summary of Contents for 3500SP

Reviews:

Brands by name

Popular brands

Ricoh 3500SP, Facsimile Reference Manual

Search results

Summary of Contents for 3500SP

Reviews:

Brands by name

Popular brands