195
6
Do
w
n
lo
ad
in
g
I
m
ag
es to
Y
o
u
r Co
m
p
u
ter
After installing the software on your computer, connect your camera
to the computer.
1
Make sure the camera power is off.
2
Connect the USB cable to the
USB port of your computer.
3
Connect the USB cable to the
USB terminal of your camera.
• Your camera turns on and the
computer automatically reads the
necessary files.
4
DL-10 starts and image
transfer begins automatically.
• DL-10 automatically creates a folder called [Digital Camera] inside
your [My Documents] folder. Downloaded images are saved in folders
with the date of each shot, inside the [Digital Camera] folder. (The files
will continue to be saved in the [Caplio] folder if you were previously
using Caplio Software.) Set the correct date and time on the camera
before shooting.
5
When image transfer is completed, disconnect the
camera and the computer. (
G
P.198)
Note ----------------------------------------------------------------------------------------------
•
For how to use DL-10, refer to the “Software User Guide” (PDF file) contained in the
provided CD-ROM. (
G
P.191)
•
If image transfer does not begin, please try the following procedures.
•
Click the [Save] button in the DL-10 window. (Only if this is your first time
connecting the camera to your computer.)
•
Restart your computer and perform Steps 1 to 5 again.
•
Confirm that the [Saves automatically when connected to USB] checkbox in the
[Option Settings] dialog box for DL-10 is selected.
Downloading Images Using the DL-10
