12
Parameter value setting
When the selected item is value need to been modified, the dialog shown in
Figure 2 will popup.
Figure 2 Dialog of value setting
⚫
Modify value
：
Can quickly modify value via pull the slider to the desired
position, or click the button of ‘up’ or ‘down’ whit finger on the right side to
set the exact desired value, another way is roll encoder on the right hand
side of panel.
⚫
Apply value
：
When Value had been modified, Then press the bottom of
‘apply’ in the left corner to apply to the light, but hav’t saved
；
⚫
Save Value
：
Any time, click on the lower right corner of the "OK" button,
the setting will been saved into internal memory.
Boolean parameter setting
⚫
when the selected parameters is a Boolean value (such as ON or OFF),
can directly modify setting by chick corresponding item, the setting will
been saved right now.
⚫
When the parameter is a key item, chick corresponding item, a dialog
shown in Figure 3 will been popup ask for the confirm. Chick ‘sure’ to
confirm.
