1 Blink
One-Fu Push Button Mode
2 Blinks
Two Function Mode
3 Blinks
Three Function Mode
4 Blinks
Four Function Mode
Brake Bias Encoder:
Turn the knob one click in either
direction. The Feedback LED will indicate the operating
mode as follows:
1 Blink
16 Increments per Revolution
2 Blinks
8 Increments per Revolution
3 Blinks
4 Increments per Revolution
4 Blinks
1 Increment per Revolution
When done changing the settings, flip/press the
designated "Program Mode" switch to exit program
mode.
Assigning Game Functions to Buttons/Toggles/Knobs
Assigning functions to each control must be done
individually in each game. In other words, setting a
switch as the ignition in one game does not make it the
ignition switch in any other game. Assigning the buttons
on the switch panel is very much like assigning buttons
on your wheel to functions in the game. You must go to
the 'controls settings' screen of each game and select
the function you want to have a switch for and activate
the button/switch/knob in the direction you wish for it
to operate when prompted by the game.
Labeling the Controls
The RACEpro Switch Panel is designed to have labels
applied to the controls and a sheet of pre-printed labels
is provided. We suggest you do not apply the labels
right away, instead use the spaces provided on the
controls layout diagram to map out the desired
functions and try them out for a few days to be sure you
are happy with their designated functions.
You will find that different games have different
controls available to be assigned. One game may have
controls for wipers while another one may not. We
have provided labels marked "AUX 1", AUX 2", "A", "B",
etc. for this purpose. This way you may assign these
uncommon game functions to these buttons/switches.
Also, many games vary slightly in the more common
functions. For example, some games may have KERS,
while another may have TURBO. Using vague labeling
such as "Boost" will keep the button/switch name
relevant even though it may not be the exact function in
the game.
Need Help?
If you run into any problems during the setup of the
button box, please contact us directly at technical
support at (305) 417-9241 or via email at
[email protected].
Due to constant improvements to our products, the
product you receive may vary slightly from the product
shown in the illustrations.
Copyright 2015, Ricmotech LLC
