Ricmotech LC27 v3 Load Cell Kit Installation Guide
This product fits the Logitech G25, G27, G29, G920, and G923
brake pedal
Items Needed:
1.
#1 Phillips Screwdriver
2.
#2 Phillips Screwdriver
3.
2.5mm Allen Wrench (Hex Key)
4.
5mm Allen Wrench (Hex Key)
5.
10mm Wrench
6.
Small Flat Screwdriver
7.
Needle Nose Pliers
8.
Small Diagonal Cutters
9.
Cardboard Box
approximately 10” x 10” x 4” (25cm x 25cm x 10cm)
Installation:
1. Begin by removing the pedal faces on the pedals you
will be working on using the 2.5mm Allen wrench (hex
key). Keep the screws together with each pedal since
they may be of different lengths.
2. Flip the pedals upside down into the cardboard box
so the pedals are hanging free and the plastic base
does not fall in.
3. If you do not have an appropriate cardboard box,
use some blocks of wood or rolled up towels to
accomplish the same support.
