INTRODUCTION
The Rickard Remote Digital Wall Mounted Thermostat/Controller is
fitted with a Room Sensor and LCD display. The Thermostat/
Controller is supplied in an aesthetically pleasing, slim 121mm by
78mm plastic enclosure. The unit provides for Setpoint Temperature
adjustment and Room Temperature display. Further advanced func-
tionality is available for commissioning and set-up purposes. The unit
is designed to mount into a standard 2x4 draw-box. The MLM wall
controller is designed to work with Rickard PC based MLM software
for further functionality.
OPERATION PANEL GENERAL LAYOUT
DISPLAY BUTTONS
IMPORTANT:
Make ensure that zoning and commissioning of diffus-
ers is done in the Rickard MLM Software Application before opera-
tion of the Wall Thermostat can start. Please request or download
the application on Rickard website.
GENERAL OPERATION
1. On start-up (power on), the following screen will be displayed.
• The software initiates and communicates with all other controllers
and interface boards connected on the same circuit.
• Previously stored information is collected from all controllers and
interface boards.
•The software version number is displayed while the software initi-
ates.
2. Diffuser limit detection:
• After software initiation the diffuser will drive to the fully closed
position.
• During this process the limit indicators on the display will flash and
the direction arrow will show that the diffuser is driving closed.
•When the motor drives into the end stop, the software will remem-
ber that position as the fully open position.
RIGHT SIDE
LEFT SIDE
Summary of Contents for mlm
Page 1: ......
