13
Product installation
Checklist before product installation
Check the following before using the
Orgone
Biomat.
1.
Check if the floor of the area for product installation is flat.
▪ If used in a non-flat area, the product may be damaged.
▪ Do not place on surfaces sensitive to heat.
5.
Inspect the plug, power cable, and power outlet for any
damage.
▪ Do not use the Orgone Biomat if any of the above is damaged.
Electric shock or fire can result from damaged components.
2.
Do not use the product in area with high humidity or significant dust.
4.
Check the voltage before installing the product.
▪ Voltage for the product: 120V or 220V
▪ Electric shock or damage to the Orgone Biomat can result from improper
voltage.
▪ The Orgone Biomat’s voltage must be the same as the controller’s voltage.
(120V Orgone 120V Controller / 220V Orgone 220V Controller)
3.
Handle the product with care. Any physical impact such as dropping
the Orgone Biomat and/or controller can damage internal components.
