JWI-586 DIGITAL WEIGHING INDICATOR
7
●
mode
setup
This function is provided to select the transmission way to send weight data
to the computer.
Prt.Pr
: unit sends the weight data only when the stable sign ( 0 ) is shown
and the " PRINT/HOLD " is pressed.
Prt.St
: unit sends the weight data automatically whenever the stable sign
( 0 )is shown.
Prt.Co
: unit automatically sends the weight data continuously to the
computer.
1. Press " TARE " key, the display will show
Prt.Xx.
Prt.Pr
2. Press " SET " key to select desired print mode and leave the print mode
setup.
♦
The pre-shipment setting for this setup is
Prt.Pr.
●
Hold
time
setup
This function enables the user to hold the displayed stable readings for a
pre-set time period of none, 5, 10, 20 or 40 seconds.
1. Press " TARE " key. the display will show
HOL.
X.
HOL.
5
2. Press " SET " key to select desired hold time and leave the hold time setup.
♦
The pre-shipment setting for this setup is
HOL.
5.
●
Beep
mode
setup
(for
weight
checking)
This function provides continuous beep for either load placed reaches the
pre-set weight target/target range
(bEEP.Un)
or falls behind/exceeds the
pre-set target/target range
(Beep.
In).
1. Press " TARE " key. the display will show
bEEP.Xx
bEEP.Un
2. Press " SET " to select appropriate beep mode and leave the beep mode
setup.
♦
The pre-shipment setting for this setup is
bEEP.Un.
3. The display will show
rESEt
(reset).
