©2021 RICHTECH INDUSTRIES
1.800.677.7791 RICHTECHINDUSTRIES.COM
2
GENERAL INFORMATION
To ensure safe and reliable operation, please carefully read this service and installation manual in its entirety before
installing and / or using this product. Reasonable care and safe methods in according with sound plumbing practices
should be strictly adhered to. Before installation, refer to and understand all relevant local plumbing and electrical codes.
DO NOT THROW AWAY THIS MANUAL. Keep it in a safe place so that you may refer to it for periodic service and
maintenance.
Always disconnect the power before servicing this product. Failure to do so may result in serious injury or death. Consult
with a qualified electrician if you are unsure of the power source or cannot determine whether power has been properly
disconnected
• Risk of electric Shock. Always disconnect power before servicing.
• Do not make any electrical connections while standing on a wet surface or with wet hands.
• Electrical Connections and wiring for a pump installation should only be made by qualified personnel.
• This equipment is only for use on 115 volt and is equipped with an approved 3-conductor cord and 3-prong,
grounding-type plug. To reduce the risk of electric shock, be certain that it is connected to a properly grounded,
grounding type receptacle.
• For proper and safe operation, the temperature range where this unit is to be installed is 40°F to 120°F and well
ventilated. Avoid installing in direct sunlight.
• DO NOT bypass grounding wires or remove the ground prong from the plug.
• DO NOT use an extension cord.
• NEVER plug this unit into an outlet while standing on a wet surface.
• NEVER lift this product by the electrical power cord.
• NEVER attempt to open or service this unit while it is connected to an electrical power supply.
• DO NOT pump gasoline or any flammable liquid near this unit. Explosion, fire or serious injury or death may result
from pumping gasoline or any flammable liquid with this product.
• To reduce risk of electrical shock, fully read and understand the operating and installation instructions
accompanying this unit BEFORE attempting to install or operate this unit.
• Know the application, limitations, and potential hazards.
• Periodically inspect sump, pump and system components.
• Maintain at least 12 inches of clearance around this unit after installed. Do not store anything on top of this unit.
This surfaces of this unit may become hot to the touch, particularly during periods of high demand / use.
• Keep free of debris and foreign objects. Perform routine maintenance as required.
Personal Safety:
• Wear safety glasses at all times when working with pump systems.
• Keep work area clean, uncluttered and properly lighted – replace all unused tools and equipment.
• Keep visitors at a safe distance from work area.
• Make workshop child-proof – with padlocks, master switches, and by removing starter keys.
• When wiring an electrically driven pump, follow all electrical and safety codes that apply.
WARNING
SAFETY INFORMATION
