Richpower Power Smith PGA2200i, Operator'S Manual

Page: 23 / 28

23
English
WARNING:
Risk of electric shock . Before any troubleshooting, switch off the engine. Suspected
malfunctions are often due to causes that users can fix themselves. Therefore check the product using this section. In
most cases the problem can be solved quickly.
Proble m s Probable Causes Solutions
Engine does not
start
The fuel tank is empty. Refuel the fuel tank with proper fuel.
The engine switch was set to OFF. Set the engine switch to the «RUN» position.
The oil was not enough. Refill the oil to the recommended level.
Spark plug is defective. Clean the electrode or change with a new one.
The engine is flooded.
Set the engine switch to the «RUN» position, remove
the spark plug and wipe up the fuel, then pull out
the starter rope 5-10 times to drain out the fuel in
cylinder. Reinstall the spark plug.
The fuel tube is broken. Contact with the local service for repair.
Engine lack of
power
Air filter is dirty . Clean the air filter.
Spark plug is dirty . Clean it.
Fuel filter was blocked. Contact with the local service for repair.
Valve tolerance is set incorrect. Contact with the local service for help.
AC socket does
not work
Overload warning.
Disconnect the appliances, and then press the output
reset button.
Circuit protector engaged. Disconnect the appliances, press the AC breaker.
DC (USB) socket
does not work
Overload warning.
Disconnect all the appliances, and then press the
output reset button.
Circuit protector engaged. Disconnect the appliances, press the DC breaker.
Generator makes
BwLOPDLwOPJTF
If the knocking or pinging occurs
under normal load, the problem may
be with the wrong gasoline being
used.
Switch to a different brand of gasoline, making sure
that the octane rating is 86 or higher. If problem
continues, contact your nearest authorised service
centre.
TROUBLESHOOTING