7
Plate
Outer Frame
Outer Frame
Door Frame
Door Frame
Door Frame
Cushioning Material
Locking Member
Holes for Plate
Extension
Less than 1.8"
Less than 1.8"
Secure with Nuts
●
If the space between Extensions is 1.8" or more, a cat may pass
through or be caught in the space. If the right and left side of
Extension are not secured with nuts, the similar accident may
occur. Please secure the Extension with the Nuts after adjusting
the space.
Bearing
Shaft
Bearing
Shaft
Shake the upper section and the lower section of
product by holding the Door and Outer Frame to
check if it comes off or wobbles.
Adjust Nuts to have space between each Extensions less than
1.8" and tighten them to secure.
Secure the Extension
4
Install the Door
Insert the Bearing on the Door into the Shaft
on the Frame.
②
Insert the Bearing on the upper section of
Door into the Shaft on the upper section of
the Frame until it stops.
5
Install The Locking Member
Remove one of the Screws from Locking Member, insert
them into the Holes from inside and outside of the Outer
Frame. Secure the Locking Member in a horizontal position
with the Screw.
6
Install the Plate
Attach the Plate on the Door Frame by the
Screws with the Cushioning Material of the
Plate facing the Outer Frame.
7
③
②
①
③
Lower the Door Frame to insert the Bearing
on the lower section of the Door into the
Shaft on the lower section of the Frame.
①
Hold the Door with Holes for the Plate
located on the Door Frame up.
●
Make sure the Gate is secured on daily basis. Please retighten the Adjuster Knobs, Bolts, Screws, Door
Slats and connection area of the Extensions as needed.
Caution
Caution
