2
1. Attach Right and Left Side Frames to Back Panel and Front Frame using Long bolts (8 locations).
2. Place Wooden Slatted Panels. Then, secure it by short bolts (4 locations).
l
Use a Phillips - head screwdriver for assembly.
l
Temporarily tighten the bolts at first, then thoroughly tighten all the bolts after assembling
the product on a flat surface.
l
Wring a towel soaked in mild detergent and water, and gently wipe the product. After wiping, place the product in an airy and
shady location to avoid discoloration, deformation and molding.
l
Do not use a scrub brush and/or polishing powder. It would cause discoloration or scratch.
l
When using creosol or other disinfectants, make sure to dilute them as instructed to avoid discoloration and paint stripping.
l
Do not use harsh chemicals such as thinner, benzene or alcohol. It would cause discoloration or paint stripping.
Back Panel
Wooden Slatted Panel
Right Side Frame
Left Side Frame
Front Frame
How to Assemble
Perfect fit for 20 x 30" cushion
(Cushion not included)
How to Clean
Specifications
l
Please note that product specifications and design may change without prior notice for the purpose of quality improvement.
l
There may be coating cracks at some joints and each product may experience different coloration of the wood grain as frames are
made of wood materials.
l
If you find something wrong with this product, please let us know. Thank you!
Designed by:
Richell Corporation, Japan
Distributed by:
Richell USA, Inc.
Grand Prairie, Texas 75050
Phone (972) 641-9795 Fax (972) 641-8495
Visit us at
www.richellusa.com
MADE IN VIETNAM
UPC/JAN
35.4"W x 24.4"D x 16.9"H
Dimension
Material
803840 70000-6 / 4973655 50700-1
Natural Wood and Plywood
