Hole for
the Dowel
Hole for
the Bolt
Hole for the Dowel
Outer Side of
Bottom Leg
Flat Washer
Flat Washer
Bolt
Bolt
Spring Washer
Spring Washer
*
Before assembling, please make sure which side of the Left/Right Side Leg is the outer side. There are only 8 holes
on the outer side of the Left/Right Side Leg.
*There are 3 holes for the Bolts and 2 holes for the Dowels, which should face the outer side of the Left/Right Bottom Leg.
8.1lbs
Step: Acacia(Lacquer finish) Rubber skid: Elastomer Anti-Slip Carpet: Polyester
Back side of Anti-Slip Carpet: Acrylic resin
Product Name
3-Step Pet Stool V1
15"W x 26"D x 18.5"H
Product Size
Product Weight
Material
l
Use a mild detergent and water and clean with a soft cloth/sponge. Cleaning with a scrub brush and/or using a
polishing powder may cause scratches, rust and/or discolor this product.
l
When using creosol or other disinfectants, make sure to dilute them, otherwise damage to the wood finish or
discoloration may occur.
l
Do not use harsh chemicals such as thinner, benzene or alcohol as these may cause damage/discoloration to
the wood finish.
l
After cleaning, wipe dry with soft cloth or place in a shaded area to air dry; do not place product in direct sunlight.
1.
Insert Dowels into the dowel holes of the Left/Right Bottom
Legs. Then attach the Left and Right Side Legs using bolts
as shown below (only one side of the Side Leg needs to be
attached).
2.
Insert the Dowels on the Cross Bar into the dowel
holes on the Bottom Leg, followed by attaching the
Top Step/Steps to the Side Leg using Bolts. Then
attach the Step Bars to the bottom Steps using
Screws as shown below.
3.
Repeat Steps 1 and 2 to attach the other Bottom Leg/Side Leg.
Side Leg
Bottom Leg
Dowel
Top Step
Step
Cross Bar
Bottom Leg
Side Leg
How to Clean
Specifications
l
Please note that product specifications and design may change without prior notice for the purpose of the quality improvement.
*One side needs to be on the bottom when
assembled by one person.
*Please make sure there are no loose Bolts.
How to Assemble
Use a Phillips-head screwdriver for assembly
.
Step
Screw
Step Bar
Shop for other Pet Supplies on our website.
