7
Front Panel
Remote
Control
BTS
FLOAT VOLTAGE
BOOST VOLTAGE
BATTERY TYPE
FUSE OPEN
BTS OH
OH
UV/OV
FLOATING
ABSORPTION
BOOST
POWER
MICROPROCESSOR SYSTEM
SWITCH-MODE BATTERY CHARGER
R
Invertek
POWER
Top-up Charge
Balance Charge
Fast Charge
CURRENT
VOLTAGE
CAPACITY Ah
BOOTS
ABSORPTION
FLOATING
0
1
LED Indicators
POWER:
It is lit when the AC power has been input through the AC plug.
BOOST:
It is lit as long as the battery is not fully charged at set charge current.
ABSORPTION:
It is lit as long as the battery is not fully charged at set voltage.
FLOATING:
It is lit when the battery is fully charged.
UV/OV:
Under Voltage---Deep battery discharge Ubat < 10V for 12V system and < 20V for 24V
system. If Ubat stays < 10V for 12V system and < 20V for 24 system
during more than 5 minutes, charger shuts down. To restart the charger:
disconnect the mains, wait few minutes and reconnect the charger on
mains.
Over Voltage--- Battery overcharge Ubat
>
16V for 12V system and
>
32V for 24V
system. If Ubat
>
16V for 12V system and
>
32V for 24V system
during more than 5 minutes, charger shuts down. To restart the charger:
disconnect the mains, wait few minutes and reconnect the charger on
mains.
OH:
Over Heat---It is flashing when the heatsink of the charger reaches > 70
℃
. The
charger shuts down when the charger is > 80
℃
.
BTS OH:
Battery Temperature Sensor Over Heat--- It is flashing when the BTS reaches
> 45
℃
. The charger shuts down when the battery temperature is > 50
℃
.
FUSE OPEN
:
Fuse is broken.
Instruction of Charging Curve Selection (4 Battery Types and 1 User
Define)
Every battery is designed according to particular technology and therefore calls for a
particular charging curve.
With Invertek battery charger, you can achieve this perfect match between battery and
charger using a switch, which is simply positioned according to the required, charging
curve.
