Rice Lake SCT20-AN, Technical Manual

Page: 46 / 65

SCT Weight Transmitter – 20 Series Technical Manual
42 Visit our website www.RiceLake.com
Figure 3-4. TCP/IP Socket Test Screen
Figure 3-5. TCP/IP Socket Test Screen (Examples)
Note
Use the added COM to communicate with SCT20-TCP/IP using the selected protocol.
SCT20 TCP/IP.exe is included on the CD for testing commands and it only works with Port 10001.
Do not include the <CR> with the command.
Supports the same commands as ASCII. See
Section 3.12 on page 48 .
Protocol Selection
To select the protocol to use on the Ethernet port, choose one of the following:
•
 - Mode 
lines of the list below (none, Modbus, ASCII, Contin, Rip, Hdrip, Hdripn). See Section 2.9 on page 22 .
•  ,  ,  are not yet used, IPAddress, Subnet Mask or Gatway address cannot be assigned
directly through the keyboard: use configuration SW Lantronix DeviceInstaller.
•

protocol is not yet implemented.