SCT-20 Series
24
Visit our website
2.10 Outputs And Inputs Configuration
Figure 2-9. Outputs and Inputs Menu Structure
Parameter
Options
Description
OUt 1
OUt 2
OUt 3
OPEn
Normally Open:
the relay is de-energized and the contact is open when the weight is lower than the programmed
setpoint value; it closes when the weight is higher than or equal to the programmed setpoint value.
CLOSE
*
Normally closed:
the relay is energized and the contact is closed when the weight is lower than the programmed
setpoint value; it opens when the weight is higher than or equal to the programmed setpoint value.
OUt 1
OUt 2
OUt 3
SEt 1
SEt 2
SEt 3
Number corresponds with OUT 1, 2 or 3
The contact will switch on the basis of weight, according to setpoints. (
) Select:
Gross
(default) - the contact will switch on the basis of gross weight or
Net
- the contact will switch on the basis of net weight (If the net function is not active, the contact will switch on the
basis of gross weight).
NOdbUS
The contact will not switch on the basis of weight, but is controlled by remote Modbus protocol commands. (Devi
-
ceNet™, PROFIBUS, Ethernet Only)
dEunEt
The contact will not switch on the basis of weight, but is controlled by DeviceNet™. (DeviceNet™ Model Only)
PrOFI
The contact will not switch on the basis of weight, but is controlled by PROFIBUS. (PROFIBUS Model Only)
EtHnEt
The contact will not switch on the basis of weight, but is controlled by Ethernet. (Ethernet Model Only)
PLC
The contact will not switch on the basis of weight, but is controlled by remote protocol commands. (Analog Only)
StAbLE
Relay switching occurs when the weight is stable.
SEt 1
SEt 2
SEt 3
POSnEG
*
Relay switching occurs for both positive and negative weight values.
POS
Relay switching occurs for positive weight values only.
NEG
Relay switching occurs for negative weight values only.
Table 2-15. Outputs and Inputs Menu Parameters
28W
28W
28W
,Q
,1
&/26(
23(Q
6(W
P2GE86
6W$E/(
*U266
1(W
G(XQ(W
(U2
3($+
&2QW,Q
3/&
Q(/2
&2())
(U
3($+
&2QW,Q
3/&
Q(/2
&2())
&/26(
23(Q
6(W
P2GE86
6W$E/(
G(XQ(W
&/26(
23(Q
6(W
P2GE86
6W$E/(
326Q(*
326
Q(*
G(XQ(W
2))
2Q
&$/,E
),/W(U
3$U$
6(U,$/
W(6W
2XW,Q
$1$/2*
DeviceNet Options
6(W
6W$E/(
3/&
6(W
6W$E/(
3/&
6(W
6W$E/(
3/&
Analog Options
6(W
P2GE86
6W$E/(
3U2),
6(W
P2GE86
6W$E/(
3U2),
6(W
P2GE86
6W$E/(
3U2),
6(W
P2GE86
6W$E/(
(W+Q(W
6(W
P2GE86
6W$E/(
(W+Q(W
6(W
P2GE86
6W$E/(
(W+Q(W
Profibus Options
Ethernet Options
