SCT-1000 Ethernet Module Parameters
© Rice Lake Weighing Systems
●
All Rights Reserved
11
3.3.4 Broadcast Mode
Setting a module to broadcast mode designates it as a Master module, and allows it to send data to other modules set on the
same UDP port. To set up broadcast mode, enter
255.255.255.255
in the module’s UDP Remote IP Address field. Ensure the
Make these settings permanent
box is checked, then click
Save
.
3.4 Manually Changing the Functioning Mode
The module has four functioning modes than can be selected by changing the dip-switches located on the circuit board. Every
time the functioning mode is changed, the module is reset to default parameters and IP address of 192.168.16.205.
3.5 Password Setting
A password can be set to prevent unwanted access to the module’s settings. To set a password:
1. Click
Password Setting
in the menu on the left side of the page.
2. Enter a password into the
Password
field, then type the same password again into the
Re-enter
field.
3. Click
Submit!
to save the password.
Figure 3-8. Setting a Password
To disable the Password feature, remove all text in both password fields and click
Submit.
Note
Summary of Contents for SCT-1000ETHERNET
Page 27: ......
