Introduction
©
Rice Lake Weighing Systems
●
All Rights Reserved
1
1.0
Introduction
This manual is meant to serve only as a general guideline for installation.Each installation
is unique and should be planned by a qualified structural engineer.
Manuals and additional resources are available from the Rice Lake Weighing
Systems website at
www.ricelake.com
Warranty information can be found on the website at
www.ricelake.com/
warranties
1.1 Overview
The RL9000TWM/RL9000TWM-HT Series weigh module is ideal for use in tank, hopper,
vessel and many other applications. This rugged, high-precision mount is designed for
easy installation and does not require check rods or other stabilizing hardware. The
stainless steel construction and welded seal offer additional protection in wash-down
areas.
They use low profile shear web load cells and transmit the load via a spherical washer on
the load-bearing hub of the cell. The shear web design eases load cell installation and
replacement without the need to raise the weighed vessel a large amount, which could
disturb piping and other connections.
1.1.1 Features
RL9000TWM
• 350 Ω
• Capacities: 1,000 lb-450,000 lb
• Very low profile design
• 3mV/V output
• Self-centering
• Self-checking assembly
• Rated temperatures – 0° to 150° F
• Offers 100% side load, 100% uplift,
150% static safe load and 300% ultimate
static overload protection
• Stainless steel construction
• Welded seal
• Weighs accurately with as much as a 3°
non-parallel load
• Includes 25' load cell cable
RL9000TWM-HT
• 750 Ω
• Capacities: 1000-50,000 lb (higher
capacities by request)
• Very low profile design
• 3mV/V output
• Self-centering
• Self-checking assembly
• Rated temperatures – 0° to 400° F
• Offers 100% side load, 100% uplift,
150% safe load and 300% ultimate
overload protection
• Stainless steel construction
• Welded seal
• Weighs accurately with as much as a 3°
on-parallel load
