Rice Lake QB Series, Operation Manual

Page: 7 / 32

Introduction 3
1.4 Installation Steps
Use the following steps to properly install the QB Series balance:
1. Inspect the leveling legs and ensure that they are all completely retracted.
2. Place the balance down on a firm, level mounting surface.
3. Using the bubble level to the upper left of the display panel as a guide, adjust the leveling legs as
necessary until the bubble is centered inside the bulls-eye of the bubble level (see Figure 1-2).
Figure 1-2. Level Adjustment
4. Plug the AC adapter into the back of the unit (see Figure 1-3).
Figure 1-3. AC Adapter Connection
5. Secure the weighing pan support onto the device. Tighten the adjusting knob until it is finger tight. Do
not use a screwdriver (see Figure 1-4).
Figure 1-4. Attach Weighing Pan Support
6. Place the platform cover down over the weighing pan support (see Figure 1-1 on page 2 for exploded
view).
7. Plug the AC adapter into a suitable wall outlet.
Leveling leg
BALANCE IS LEVEL
Blue
circle
Bubble
BALANCE IS NOT LEVEL
Adjusting
Knob
R I
C E
L
A K
E
QB
OV
ER
AC
CE
PT
UN
DE
R
ON
OF
F
P
F
T