Function Parameters
17
4.1
Viewing Parameters
The following information provides a step-by-step procedure to view the parameters of the QB Series balance.
1. Turn the balance on (see Section 1.7 on page 5).
2. If the device does not show a
0.0
value after the normal start sequence, press and release the
P
key.
3. Turn the counting function off (see Section 2.9.5 on page 13).
4. Press and hold the
F
key until the display reads
FUNC
.
5. Immediately release the
F
key.
NOTE: If you hold the F key down too long, the display changes from FUNC to CAL. Simply press and release
the P key to return to the default weighing mode and return to step 4.
6. When you release the
F
key, the display reads
1.SEt.X
where “X” is a value of either
1
or
2
. (see
Table 4-1 on page 15 for a definition of these parameters).
7. Press and release the
F
key again to advance to the next parameter display. Compare the information in
the display to the information in Table 4-1 on page 15.
8. Continue to press and release the
F
key to scroll through each of the parameter function displays.
Figure 4-1. Function Parameters
9. When you press and release the
F
key after the last parameter, the device returns to the default weighing
mode.
4.2
Changing Parameters
The following information provides a step-by-step procedure for changing the parameters of the QB Series
balance.
1. Turn the balance on (see Section 1.7 on page 5).
2. Ensure there is no load on the platform.
3. Ensure that the device is in the normal weighing mode, not the counting mode. To turn off the counting
mode and return to the normal weighing mode, see Section 2.9.5 on page 13.
4. If the device does not show a
0.0
value after the normal start sequence, press and release the
T
key.
5. Press and hold the
F
key until the display reads
FUNC
.
6. Immediately release the
F
key.
7. If you hold the
F
key down too long, the display changes from
FUNC
to
CAL
. Press and release the
P
key
to return to the default weighing mode and return to step 4.
8. When you release the
F
key, the display reads
1.SEt. 1.
5. E. 3
Response Speed
4. AP. 1
Auto-power Off
3. A.O 1
Response Speed
6. IF. 1
Weight Unit
1.SET. 1
Weight Unit
1.SEL. 2
Zero Tracking
21.C . 2
Auto-power Off
➩
➩
➩
➩
➩
➩
*Only applies when device
is RS-232 equipped.
22.L . 1
Response Speed
➩
23. . 2
Response Speed
➩
ON
OFF
F
P
T
ON
OFF
F
P
T
ON
OFF
F
P
T
ON
OFF
F
P
T
ON
OFF
F
P
T
ON
OFF
F
P
T
ON
OFF
F
P
T
ON
OFF
F
P
T
ON
OFF
F
P
T
6 1. . . 0
Output Control
*
ON
OFF
F
P
T
62. .L. 1
Weight Unit
ON
OFF
F
P
T
7. . 1
Weight Unit
ON
OFF
F
P
T
➩
➩
➩
Summary of Contents for QB Series
Page 1: ...42194 QB Series Precision Balance Operation Manual ...
Page 2: ......
