Maintenance
© Rice Lake Weighing Systems
●
All Rights Reserved
25
6.2 Service Counters
Only a Rice Lake Weighing Systems factory representative can reset the service counters, as these are an
important safety warning feature. A thorough load train inspection is necessary to ensure product safety.
Service Counters are important safety warning features and can only be reset at the factory by certified Rice
Lake personnel.
As part of the reset process, the service technician will perform a thorough load train inspection to ensure user
safety and confirm that the product is ready to be returned for regular service.
See the Crane Scale Safety and Periodic Maintenance Manual (PN 153105) for proper loading techniques to
Periodic Maintenance Manual (PN 153105) at
www.ricelake.com
.
The MSI-4260 IS maintains two service counters for safety.
• The first counter counts the number of times the scale has been overloaded
• The second counter counts lifts above 25% of capacity
These counters serve to warn the user to inspect the load train after a number of overloads and also when there is a chance of
fatigue failure. The power up routine will be interrupted when the lift counter exceeds 16383 lifts or the overload counter
exceeds 1023 overloads. If the screen displays
when unit is powered on:
1. Push
to display the 25% lift counter.
2. Push
again to see the overload lift counter.
3. Push
to acknowledge the warning and return to standard scale operation.
The power up warning message won't appear again for another 16383 lifts (or 1023 overloads).
6.2.1 Access the Service Counters:
Use the following steps to access the service counters.
4. Program a user function key to be
).
5. Press
.
6. Press
within two seconds. The display flashes
•
(for Lift Counter) followed by the number of times the weight has exceeded 25% of capacity
•
(for Overload Counter) followed by the number of times the weight has exceeded capacity
•
followed by the C-Cal value
The display then returns to the weigh mode.
To stop the scrolling and step through them proceed to step 7.
7. Press
immediately after
is pressed.
8. Press
to scroll through counters.
9. Press
to enter the counter, the value displays.
10. Press
to return to weigh mode.
The power up warning message will not appear again for another 16383 lifts (or 1023 overloads).
WARNING
TARE
T
TARE
T
st
ZERO
Note
USER
F
TARE
T
USER
F
TARE
T
USER
F
TARE
T
st
ZERO
Note
Summary of Contents for MSI-4260 IS
Page 32: ...MSI 4260 IS Port A Weigh 28 Visit our website www RiceLake com...
Page 33: ......
