Rice Lake MSI-4260 IS, Technical Manual

Page: 26 / 34

MSI-4260 IS Port-A-Weigh
22 Visit our website www.RiceLake.com
5.6 Calibration Setup Menu
The Calibration Setup menu contains two additional items beyond Calibration:
• Standard menu
• Auto Zero Maintenance menu – Auto0
Additional menus display that are transferred from the main setup menu when Legal for Trade settings are used.
5.6.1 Standard Menu
Use the following steps to set up a Legal for Trade standard settings.
1. Remove the hex seal screw from the MSI-4260 IS using the steps from Section 5.1 on page 18 . and

displays.
2. Press .

displays.
3. Press to enter the CAL Setup menu.
4. Press to enter the standard menu. The current standard setting displays.
5. Press to scroll to the desired standard.

displays.
6. Press to set the standard.

or the next item in the CAL Setup menu displays.
7. Press twice to exit setup and store all changes.

displays.
Selection Description
Industrial (
indu5
) This is the most common setting for the MSI-4260; With the Industrial standard, you have full range zero, access to units
switching, filters, and peak hold
Handbook 44 (
Hb-44
) Sets the scale to enable only approved features per the NTEP HB-44 rules and regulations; Access is denied to Peak Hold, and
the zero range may be limited; Filter menu is moved to the Cal Setup menu, so filters are only accessible through the Cal Seal
R-76 (
r-76
) Sets the scale to enable only approved features per OIML R-76; Only kg weight units are available; The zero range is limited to
4% (-1 to +3% relative to Calibrate zero); Net/Gross function is temporary; Once Net weight is established, pushing an F-key set
for Net/Gross will cause a maximum 5 second display of the Gross weight; You must clear the Tare to display Gross weight
constantly; Other metrological aspects are changed to meet R-76 requirements
One Unit (
1unit
) The one unit Standard is exactly the same as Industrial, except units switching is inhibited; This is useful for Metric only countries;
Another use of the One Unit standard is to allow the scale to be calibrated in units other than lb or kg, since conversions are
eliminated; Contact MSI for more information on the Standards settings
Table 5-1. Standard Menu Selections
USER
F
TARE
T
TARE
T
USER
F
TARE
T
st
ZERO