Rice Lake BenchPro BP-P, Operation Manual

Page: 25 / 32

Communication
© Rice Lake Weighing Systems ● All Rights Reserved 21
6.5 Sealing Scale for Weights and Measures
Once parameters for the scale have been configured and the scale has been calibrated, see Section 4.2.2 on page 8 , the scale
must be sealed for Weights and Measures.
6.5.1 Seal Scale
1. Lift the weigh platter from the scale.
2. Guide sealing wire through the drilled hex screw and through the PCB compartment door handle.
3. Seal the wire to secure.
Figure 6-4. Top View with Weigh Platter Removed
Command <LF>R<CR> (0Ah,52h,0dh)
Response <LF> <s> <r> <n> <m
>
<f> <W
>
<W
>
<W
>
<W
>
<W
>
<W
>
. <W
>
<W
>
<W
>
<U> <U> <U> <CR>
Table 6-29. Repeat Displayed Weight Continuously
Command <LF>S<CR> (0Ah,53h,0dh)
Response <LF> <s> <r> <n> <m
>
<f> <W
>
<W
>
<W
>
<W
>
<W
>
<W
>
. <W
>
<W
>
<W
>
<U> <U> <U> <CR>
Table 6-30. Repeat High-Resolution Weight Continuously
Sealing Wire