FlexWeigh System 201 and 202
26
Visit our website
4.4 E-Stop and Reset/Resume
1. Press the E-Stop button.
2. System turns off all outputs and displays
System Paused
.
3. The resume switch restarts current batch after the E-Stop button returns to the run position. When the system is
paused, selecting reset switch will return back to Step 1 to allow the operator to start over.
4.5 Audit Trail Print
Record keeping is an important part of any system. The FlexWeigh Systems 201 and 202 have the ability to be connected to a
printer for retaining detailed records on batches, cycle runs, cycle paused, etc.
The preferred printer to integrate with
Systems 201 and 202
is the
TM-U220 Tape Printer
but will interface with any strip printer.
Connect printer per printer instructions.
Shown below are five examples of tape samples that can be printed using the
TM-U220 Tape Printer
.
Figure 4-7. Tape Printer Example
Batch Stopped & Resume & Reset Print
No Extra ID Fields Running Batch Print
Sub Total Printout
Total Printout
2 Extra ID Fields Running Batch Printout
