Wheelchair Scale with Seat Operation Manual - Scale Assembly
3
3.0
Scale Assembly
3.1
Unpacking Your Scale
Place the unopened box in an open area that has ample room for unpacking the scale.
Parts contained in the shipping box include:
•
The scale
•
This manual
•
Small box containing AA batteries (6) and scale feet.
3.2
Repacking
If the Digital Wheelchair Scale with seat must be returned for modification, calibration or repair, it must be
properly packed with sufficient packing materials. Whenever possible, use the original carton when shipping the
scale back.
Important
Damage caused by improper packaging is not covered by the warranty.
3.3
Setting Up Your Scale
Use the following steps to set up the Digital Wheelchair Scale with seat.
1. Locate the manual from inside the box and set aside as it will provide instructions on the proper scale
removal and set up.
2. Move the scale into the area where the weighing process will occur. It’s recommended to place the scale
on a hard, level surface for the most accurate weighments. Thin carpeting is fine but not recommended.
3. Using two people, remove the scale out of the packaging material that it came in by lifting the scale out
of the box by the scale base.
Note
DO NOT lift the scale out of the box by its handle as this can cause the hinges to break.
